Best Roofing System

You need to decide on which kind of material you will use for your Best Roofing System. Polyvinyl Chloride (PVC) is the most common roofing material used in the construction of roofs. EPDM is a synthetic rubber that is very flexible, durable, and less expensive than PVC. TPO is a synthetic rubber with a high-temperature resistance.

PVC, EPDM, and TPO are all types of flat roofing which have many advantages over other roofing systems. Maintenance and repairs are less demanding with these materials than others. TPO, PVC, and EPDM offer building owners many luxuries such as green options, solar, and additional space for recreational purposes.

The Cost of an EPDM Roof

EPDM roofs are priced between $4 to $8 per square foot, which averages out to be around $6,000-$12,000 for 1,500 square feet. The initial cost of an EPDM roof is higher than other types of roofs, but it has long-term costs that vary depending on the climate. EPDM roofs have a long life and require very little maintenance other than seam repairs.

The Cost of PVC and TPO Roofs

PVC and TPO roofs cost more upfront than EPDM roofs. Single-ply membrane roofs are typically used on flat or near-flat roofs, while EPDM is most commonly used on low-sloped or flat roofs. Ballasted EPDM systems are relatively inexpensive, while fully adhered or mechanical systems are slightly more expensive than TPO.

TPO is the cheapest single-ply membrane roofing solution available, costing less than EPDM and other types of rolled rubber roofing systems. TPO is less expensive than PVC, costing $1-$2 per sq. ft. EPDM is the least expensive roofing material, costing $0.50-$1 per sq. ft.

EPDM Roofing

EPDM roofing is made up of recycled tires, slate dust, and sawdust. EPDM roofing system is a thermoset; it doesn’t need welded seams. Cost-friendly compared to PVC, TPO, and EPDM.EPDM is the least expensive roofing material, costing $0.50-$1 per sq. ft., and it’s also the most widely used single-ply membrane system in North America.

TPO Roofing

TPO is also made up of recycled tires, slate dust, and sawdust as well as various types of resins; however it requires a welded seam for its installation. TPO roofing system is a thermoplastic; it requires welded seams. Cost-friendly compared to PVC, TPO, and EPDM is the least expensive roofing material, costing $0.50-$1 per sq. ft., and it’s also the most widely used single-ply membrane system in North America.

EPDM vs TPO vs PVC

EPDM is a popular roofing material because it has good water resistance and does not corrode. TPO is a cheaper alternative to EPDM, but it does not have as good of an outdoor durability as EPDM. PVC is the most common type of roofing material in the US, but it has low water resistance and can be easily damaged by rain or snow.